WHAT CAUSES BAD BREATH-

      Causes for bad breath are many other than brushing and flossing twice everyday which helps to remove bacteria which causes bad breath.

      Food that you prefer can also be a factor. Like Onion & Garlic add to bad breath as the food is absorbed into the bloodstream, it is transferred to the lungs where it is expelled. Brushing, flossing & mouthwash will only mask the odor temporarily but odors continue until the body eliminates the food. Dieters can develop unpleasant breath from uncommon eating.

      Bad breath can also be caused by dry mouth (known as xerostomia), which occurs when the flow of saliva decreases. Saliva cleanses the mouth and removes particles that may cause odor. Dry mouth is caused by various medications, salivary gland problems or continuously breathing through the mouth. If you suffer from dry mouth, your dentist may prescribe an artificial saliva, or suggest using sugarless candy and increasing your fluid intake.

      Tobacco products are another cause of bad breath. If you use tobacco, ask your dentist for assistance in helping you quit.

      Bad breath could also signal a medical disorder. Local infections in the respiratory tract, chronic sinusitis, postnasal drip, chronic bronchitis, diabetes, gastrointestinal disturbance, and liver or kidney ailment can cause breath odor. If your dentist determines that your mouth is healthy, you may be referred to a physician to determine the cause of bad breath.

      Maintaining good oral health is essential to reducing bad breath, so be sure you schedule regular dental visits for a dental cleaning and checkup. Brush twice a day with fluoride toothpaste to remove food debris and plaque, and brush your tongue, too. Once a day, use floss or an inter-dental cleaner to clean between teeth. Mouthwash can also come in handy to eliminate bad breath temporarily

Following Infographic explains 6 daily and easy activities which will help you maintain Good Health and Bad Breath-

This Infographic was Provided by- http://www.daltechsystems.com/ 

For more information on Dental Care you can visit Oral Care Center.

6 DIY Techniques To Prevent Bad Breath

With the advancement of medical science, a number of advanced dental technologies have been invented. Using state-of-the-art tools and scientific procedures, these technologies ensure perfect solutions for the traditional oral and dental problems. The ultimate purpose of making use of these advanced technologies is to make the entire process of dentistry more durable, comfortable and efficient. At the same time, it’s also ensured that such dental solutions not only look aesthetically beautiful, but are also as natural as possible. With the help of these advanced technologies, it has now become easier to complete difficult and time consuming procedures at one go. If you are planning to opt for a dentistry surgery, you must know about the dental lab technology would be the most suitable to opt for.

• Laser dentistry - It is a popular dental laboratory technology and is considered to be an effective alternative to many other procedures. The reason why a large number of people opt for laser dentistry is that it's a painless process and needs a short healing period. Laser dentistry is followed mostly for curing problems like cold sores, tumors, decay removal, crown lengthening, gummy smile changes, tongue tie and dental fillings. Apart from these, laser dentistry is also used for curing tooth sensitivity, conditions that are related to sleep apnea, and nerve regeneration for damaged blood vessels and nerves. This method is known to be effective for improving speech impediments as well.

• Dental implants - This is one of the most advanced dental technologies in the field of dentistry. In this procedure, patients can expect the best possible function and fit since the tooth root is replaced with an advanced unit. The dental implants are integrated with the jaw bones. Anyone who wants to replace a missing tooth can opt for this method of treatment. One of the greatest advantages of this procedure is that it requires a shorter healing period. Following this process, the crown can be attached to the implant immediately after extracting the tooth. Earlier, one had to wait for six long months for the completion of the entire process.

• CAD CAM dental technology – This is one of the latest technological advancements in the field of dentistry. It's a software that enables dentists to perform complicated dental operations with efficiency.

The benefits of CAD CAM dentistry are multiple. Studies show that with the advancement of technology, the restorations have become way stronger as compared to those that are milled from conventional materials and manufactured in the old fashioned process.

Greater Efficiency - Dentists having in-office CAD CAM systems provide their patients with efficient and assured services. For instance, if there is any required tooth preparation, dentists who use CAD/CAM dental technology will be able to do it with the help of a slight local anesthesia.  

Fast Process - One of the biggest advantages of CAD CAM dentistry is that you can expect a fast treatment process. If a dentist has the technology ready in his office, he will be able to perform the operations faster. This ensures same day treatment for patients. Usually, E4D dental systems or CREC in-office are the systems that are used to design the inlay, onlay, crown and veneer.

Assured Accuracy - One of the biggest advantages of CAD CAM dental technology is utmost precision. Since the technology is completely computer aided, there are very less chances of error. This ensures greater user satisfaction and accurate results.

With the help of these advanced technologies, dentists can offer the best possible services to their patients. You should choose the right method after consulting your dentist and considering your budget as well as requirements.

Modern dental milling machine models are extremely compact, enable easy installation and can be used for more than one purpose. CORiTEC 240i is one among them. It lets productive entry in CAD/CAM automation and is carefully designed with a system of 4 axes suitable for wet and dry milling of zirconium oxide, aluminum oxide, resins, wax, feldspar, etc.

When your milling machine is compact in size and offers more features, you can be sure of producing more number of high quality dentures.

Technology: This mill has high compatibility to CAD/CAM software along with high stability of rotary axis transmission. The efficiency of this mill with the additional adaptor makes it appropriate for milling and grinding of nano-composite block materials.

CORiTEC 240i lets you produce up to 45 units without you having to change the blank and this is made possible with the 10-times automatic tool changer, which also includes tool measurement. It has automatic control for tool breakage and features the simplest handling of single click operation.

The night mode feature of the CAD/CAM software enables automatic switching off after process completion. This milling machine offers the highest precision, as it has the spindle frequency that goes up to 60,000 rpm. In fact, this is the best option if your lab is small or medium sized and needs an efficient, low cost system with high-end features.

With CORiTEC 240i, you can produce precision milling of the required models such as dies-ditched model or sawn and pinned model. The pin plates, which are patented facilitates, direct application through magnet along with short milling times. This would ensure that your products are finished with precision and on time.

You can also make milling and modeling of sport splints, bite splints, and night guards. The material costs are low with absolute accuracy of fit in 16 different colors.

In essence, CORiTEC 240i milling machine offers you high return on low investment.

When treating patients, dentists may order for production of several dental restorations that are required for the treatment. Such restorations are usually produced by certified dental laboratories using advanced dental lab technology. When such a restoration is required, a dentist has to send a copy of the prescription specifying the treatment that the patient is undergoing, along with the items to be manufactured and also mold of the patients’ teeth or mouth to the laboratory, which would be used as a measurement. Dental laboratory technology is used by the lab technician to create the exact item.

Certain specific standards with regard to quality assurance, safety, manufacturing and business practices need to be followed by such certified dental laboratories. Here are certain facts to know about these laboratories before using their services:

• It is important to find out if such laboratories have the license and are authorized to carry on such activities.

• You should check if excellent and qualified technical support is being used in the laboratory for production of various products.

• The laboratory should uphold safety and quality standards with regard to the products used and the processes followed for creating the various items as per dentists’ prescriptions.

• The dental lab should maintain proper record of the various products it uses, their manufacturing and expiry date as well as the brands of such products. It should be ensured that quality products are used, which won’t pose any health hazard to the patient.

• It should meet different government regulations imposed on such laboratories and maintain proper records of the same.

• It should be monitored to see if the certified dental laboratories have trainings on infection control and that all their staff has mandatorily attended such training and procedures and applies such knowledge while producing products required in the treatment.

• The lab should have a remake policy in writing.

• The fact that the laboratory provides expertise in the specific areas should also be stated.

• It will be best if The laboratory have the latest machines like a milling machine, 3D Dental scanner, CAD/CAM software etc. which gives a better result in less time.

A certified dental laboratory (CDL) should check all these above pointers and use modern dental laboratory technology to provide the patients with excellent service in dental care. Such a lab takes pride in its professionalism and top-notch quality as its certification represents it to be in the top rungs of its industry. In case your dentist uses a CDL, you can have the confidence of knowing that the lab in question meets the specific standards and uses modern dental laboratory technology to offer outstanding services and facilities.

Dentists play a very important role in our lives by fixing our dental problems and help us sport that perfect smile. Hence, it is very important for the dental labs to be equipped with the latest technologies and dental lab equipments to ensure that the patients get treated fast and with ease. It is equally essential to maintain hygiene and safety while carrying out any dental procedure to avoid infections and other serious health complications.  This is why protective equipment should be used and equipments disinfected properly before and after every use.

When a dental care unit is set up with the motive of taking excellent care of patients, certain laboratory equipments are required to be present for the dentist to perform the procedures on the patients. Equipments such as scale, drills, mirrors, picks, suction tubes, air compressors, dental scanners, sintering furnaces, milling machines and the likes are required compulsorily for the treatment of the patients safely and easily.

Dental lab equipments used may not be the same in each dental care units as it all depends on the procedure that is practiced in a specific unit. While some units deal with a very limited set of dental problems and issues, some others may have a broader scope. Hence, based upon the services that the dentists wish to offer, the decision to buy dental lab equipments is taken. For instance, some basic dental lab equipments that a dental care unit should have include specialty chair for patients, X-ray machines, masks, gloves, trays, water lines, dental syringes etc. Units with a wide scope of work may also use advanced dental laboratory technology such as pinhole drills, articulators, ultrasonic cleansers, oral vibrators, electric waxers, water baths, pneumatic chisels, ceramin oven and much more so that better care of patients can be taken.

Scanner is one of the most essential dental lab equipments that dentists require in order to perform dental surgeries. Dental scanner is an integral part of most dental operations, especially the complicated ones. The scanners deliver superior data with improved measurements. Although there are several imaging technologies that can be used for dental surgeries, the dental scanners are designed to create a 3D digital model, based on either an impression or a physical dental model. These scanners are one of the most revolutionary inventions of the dental laboratory technology. However, it's essential to know the features of an Identica scanner, as mentioned below, in case you are planning to buy one:

• Twin camera technology – The Identica scanner boasts of a function that obtains a single set of data with two high resolution cameras. This precise data is way more accurate as compared to other scanners that are equipped with a single camera.
• 3D white light scanner – These scanners are manufactured following the white light 3D scanning technology. This enables users to obtain clearer data than the conventional laser type scanners. White light scanning ensures noise free and clearer 3D data.
• Sharp margin line – With the help of the twin camera technology, the scanner is designed for optimal measurements of margin lines. With a superior arrangement of the 3D scanning module and the rotary stage, this scanner offers a margin line that’s way sharper than other types of scanners.
• Fast scanning speed – The Identica scanner is designed in such a way such that it can scan a single tooth model just within 1 to 2 minutes, while bridges take anywhere between 3 and 4 minutes. The scanner can scan any object, irrespective of the shape of the model.

With the help of these advanced features, an Identica scanner enhances the quality of the end product in dental CAD/CAM applications. Thanks to its high-precision 3D scanning and the use of excellent 3D measurement technology, the Identica scanner has revolutionized dental laboratory technology by optimizing production and cost efficiency for the laboratories.

If you have been looking for a high-end 3D scanners ideal for CAD/CAM applications, invest in an Identica scanner today!

We all have read and experienced a number of advanced methods and techniques that are now being used in case of dental treatments. The advancement in technology has contributed a lot towards this field too. The root canal procedure, the dental implants and cosmetic dentistry are all examples of the introduction of technology in the dental field. All these treatments have proved to be the best solution to the problems they have been discovered for. Although most of them might be painful, they are worth all the pain. A little pain now, will save your health for the future. Let us now see what is Dental Implant and how does it contribute to maintaining a healthy dental health.

What is a Dental Implant?

Dental Implants are the small metal posts that are positioned into the jawbone beneath the gums. This is where the dentist then places the replaceable tooth and the crown. The plate or the frame acts as a support to the artificial tooth that is used to replace a missing tooth.

When do you need a Dental Implant?

It is the combined decision of you and your dentist as to where the Implant needs to be placed. Dental Implants can be done if you are looking out for a solution to the following problems.

• If a single tooth is missing: This is done by placing a single implant and a crown to cover up the empty space.
• If several teeth are missing: You cannot use the above method to replace every single tooth. Therefore, the use of implant supported bridges can be used.
• If all your teeth need to be replaced: You can try replacing all your teeth using the implant supported full bridges or dentures.

Who can undergo a Dental Implant?

Like every other treatment, here too you will have to consider the other health conditions that your body is going through. Everyone who is eligible to undergo a dental extract can agree to go in for a dental implant. People suffering from chronic illnesses like diabetes and other heart diseases should be examined personally.

Dentists should also examine the health conditions of those who are used to heavy smoking and those who have undergone a radiation treatment in the head and the neck area. Although the entire process of Dental Implant may sound to be simple, it is always better to get a safe thought from the dentist and the physician you are referring to.

Advantages of undergoing a Dental Implant

As we have already seen that every treatment that a person undergoes has a few advantages and a few disadvantages. If we make sure that we have taken all the precautionary measures before, during and after the treatment, it will surely give us more benefits than the side effects that may be seen. The main advantages of getting a dental implant done are:

• Improved Appearance with a realistic Feel: The dental implants look exactly like the natural teeth and are fixed right into the bone. They improve the appearance of your teeth and act as a permanent solution to the missing teeth.
• Improved Oral Health: Unlike the other tooth supported bridges that are used in the other treatments, the metal plates in Dental Implants do not require any alterations in the neighboring teeth. The plates are connected directly to the jawbone that provides enough support for the replaced tooth.
• Convenient: The Dental Implants are a permanent solution for missing teeth. They need not be removed like the removable dentures for cleaning. Thus, it avoids embarrassing situations where you will have to remove your dentures and eliminates the need for adhesives used some to keep them in place.
• Easier Eating: It is found to be difficult to chew with the sliding dentures present in the mouth. Dental Implants are the permanent and strong replacement for missing teeth and thus act like natural teeth. You might not have any difficulty chewing your food with these artificial teeth.

Things to Remember after a Dental Implant

After you have spent enough time and money for undergoing a dental implant, you will now need to take enough safety measures to protect them. These teeth are similar to the natural ones that you may have. Thus, the same techniques can be used here as well. You need to keep your teeth clean and plaque free. Thus, regular brushing and flossing is important.

A regular visit to your dentist will help you clear off  any minor problems immediately without letting them become major issues and affect the entire dental health. It is thus seen that Dental Implants are, no doubt, the best solution for missing teeth. But, one needs to take enough care during and after the treatment.

Good oral health is important for your overall well-being. You should make sure to visit the dentist regularly as this is important for healthy gums and teeth. Dentists can guide you with the proper brushing and cleaning techniques, apart from spotting early signs of dental problems and perform treatments to cure oral diseases with the help of advanced dental lab equipments, if they spot any.

Here are ten simple tips to follow, which will ensure good oral health and hygiene -

1.    Change your toothbrush at the right time – Make sure to change your toothbrush every three to four months. It is equally important to brush your teeth at least twice a day. This will ensure that food particles don't get to stay within your mouth for long and act as the breeding ground for bacteria and viruses.

2.    Brush your teeth properly – While brushing twice a day and changing your toothbrush is important, you also need to know the right method of brushing your teeth as well. According to dentists, you should place the toothbrush at a 45 degree angle against the gums. Ideally, move it in a circular motion, instead of opting for a strong back-and-forth motion.

3.    Pay attention to what you drink and eat – Foods that contain acidic components dissolve the minerals of tooth enamel and soften the tooth material, which in turn can lead to cavities. Therefore, be selective about what goes into your mouth.

4.    Protect your teeth – Make sure to wear a mouth-guard or a full face helmet whenever you are playing an outdoor sport to avid chipping, breaking or damaging your teeth and gums otherwise.

5.    Clean your tongue – For maintaining good oral health, it is also important to keep your tongue clean. Use a tongue scraper to remove the tongue plaque every day.

6.    Visit your dentist at regular intervals – Make sure that you go for dental checkups at regular intervals, even when you don't have problems like bleeding gums or toothache. Don’t be afraid of dental lab equipments as you may not even need them if you maintain oral hygiene and follow your dentist’s advice.

7.    Eat crisp food – Crisp foods like popcorn and celery, often called 'detergent' foods, help clean your teeth. So, try including them in your diet.  

8.    Use apple cider vinegar to gargle – Before brushing your teeth in the morning, consider gargling with apple cider vinegar as this helps whiten teeth, kill bacteria and remove stains.

9.    Always stay fresh – You can check the freshness of your breath by licking your palm and smelling it when it is still wet. If this smells bad, consider having a sugar-free breath mint.

10.    Use baking soda to brush your teeth – It is advisable to brush your teeth, at least once a week, with baking soda as this helps remove all the stains and whiten your teeth.

Keep your gums and teeth healthy with these tips and enjoy a sparkling smile for years to come. You may even consult your dentist to improve your dental health with the use of contemporary dental lab equipments.

When asked why they avoid regular dental checkups, many people said that they are scared of the pain that they may have to bear and a few others said that they do not want to undergo treatments that include a lengthy procedure. But, are the dental treatments really that painful and lengthy? Aren’t there any easier methods to replace such treatments?

A dentist is the right person who can help you select the best treatment that you need. With the introduction of advanced technology in almost all the medical fields, the dental health care industry is in no way an exception. Here too, many dental lab equipments have been introduced to make the tasks easier for dentists and bearable for the patients.

We all know that technology has been helping in making things simpler. Similarly, when we are talking about the use of latest equipments in the dental field, it does mean that the entire dental procedure will be made easier so that dentists finish their task soon without causing much pain to the patient. There are a number of equipments that are necessary in a dental clinic.

The Digital X-ray machine is an important equipment that is a must at a dental clinic. The regular ones will give you a mystified image on a film that you barely understand. But, the more advanced machines that now introduced in this field promise less use of radiation and are thus environment friendly. There are also machines that display the image immediately on the computer screen. The dentist can then explain what is exactly wrong with the tooth.

When a dentist is examining a patient’s mouth, the patient has no idea about what can be seen within. If a camera is used in this case and a monitor placed before the patient, it will help in showing the patient what exactly the problem is. According to dentists, cameras like this, do not only give them a larger view of things, but make it easier to explain the patients about the root cause of a problem.

Patients are often found visiting a dentist when its too late. Either the cavity has reached deep within or it has completely destroyed the tooth. But, if one can make use of a laser scanner to detect these cavities well in advance, dentists can help patients deal with the problem at an earlier stage. Detecting a cavity even before it actually starts affecting the tooth can help in saving the original condition of the tooth.

We have thus seen how useful these advanced equipments can be. They will make work much easier for the dentists and will help in making the patient realize the severity of the problem and will also speed up the entire procedure. Thus, a dentist who wishes to invest in these dental lab equipments, should prefer purchasing the latest ones that have all the advanced features.

What is Zirconia?

Zirconia or Zirconium Oxide is a powdered metal that is used to produce dental Zirconia or frameworks or even dental substructures like bridges and crowns. It is a replacement for the earlier used gold and silver. Zirconia gives a whiter look to the teeth and is transparent for x-rays.

What is a Zirconia Crown used for?

A Zirconia crown is a wonderful cap that helps cover chipped, disfigured, broken or stained teeth. The crown makes them look natural and pretty. These new types of restorations make the tooth look aesthetic and natural. The destroyed part of the tooth is first chipped off and then later is shaped in such a way that the crown can fit in comfortably.

Let us take a look at the advantages of such crowns.

1. Strength: The material used for dental Zirconia is made using a powder that possesses crystalline properties. This makes it sturdy and durable. The strength of the crown determines how long will it support you and reduce your trips to the dentist.
2. Unbreakable: As we have already seen that the Zirconia is made using a strong material that makes them unbreakable and strong enough to bear all kinds of wear and tear. This reduces the frequency of the visits that a patient would have to pay to the dentist.
3. Aesthetics: Zirconia is made of a crystalline, transparent material that makes it look not much different than a real natural tooth. One may not be able to distinguish between the part of the tooth and the Zirconia crown that may be placed over it.
4. Highly Compatible with the human body: Zirconia is a material that does not cause any harm to the human body. It is used as a raw material to make artificial joints. Unlike the other materials used, this does not create problems like infections or allergic reactions. Thus, it is completely safe to be used in the making of dental restoration materials.
5. Easy procedure: When a person may first think about dental procedures or corrections, all that he might think is about the longest time and lots of pain that one would experience. But, fitting in Zirconia Crowns is an easier task. The tooth is not extracted completely like it is done in other forms of treatment. Only the defected area of the tooth is removed and the rest is made ready to hold the crown.

These are the 5 basic advantages of getting a Zirconia Crown fitted. Another important advantage of such a treatment is that it prevents the graying of the gums that is usually found in the case of many other treatments.

The word “Zirconia” is derived from Zirconium Oxide, a white powdered ceramic metal like substance to craft frameworks for crowns, bridges and other dental substructures. It is significantly utilized in superficial dentistry to ensure restoration of a whiter appearance and translucency of the tooth. Zirconium crowns are the ideal solution to several dental issues caused due to unhealthy eating and drinking habits that encompass consumption of antibiotics, tobacco, carbonated drinks, coffee, tea etc.

Zirconium crowns are framed in a manner that they encircle a tooth that has been affected by a threatening cavity. It is typically used to enhance the quality, strength and form of teeth. Though you can find crowns made of different materials, those using zirconium have been steadily growing in their popularity. These crowns have a very thin line to corrode, due to their strong ceramic metal composition. What’s more, their lack of electric conductivity ensures that you don’t feel the too cold/hot sensations that you would with other crowns.  

In order to formulate Zirconium crowns, a temporary crown is mounted by uprooting the decomposed segment of your natural tooth. The new crown is securely fixed after it is prepared, thus ensuring a lifelong resolution to your oral health concern. Opting for zirconium crowns lets you bridge gaps in teeth and establish a strong foundation to healthy teeth that rivals all other crowns built of materials such as porcelain, plastic metal etc.

The growing popularity of zirconium crowns can also be attributed to their look, which is very similar to that of natural teeth. These crowns permit light to pass just like a normal tooth would, thus giving your teeth a natural look, contrasting other metal cores that block the passage of light. Many users say that it’s really difficult to tell the difference between natural teeth and zirconium crowns, which in turn make them high in demand for dental work and those looking to get an aesthetic look. Another factor working in favor of zirconium crowns is their ease of use as you can get them fixed using conventional dental cements.

Zirconium oxide is one of the most desired biocompatible substances for dental crowns. It is not only a robust substitute to gold or stainless steel wrapped in the exterior of a rotted tooth but can also be powdered with a laser grinding machine to offer a better fit. This facilitates less labor association and makes it more cost effective, providing an advanced product with a much enhanced longevity. No wonder why zirconium crowns are in vogue and many consider them to be the right choice for their oral health.

With a considerable growth observed in the overall healthcare industry, there is also an increase in the number of dental clinics across the world. These clinics need different categories of Dental Lab Equipments that will help them perform their duty with ease. These equipments are categorized depending on the task they are used for. Let us go, through each of these categories to know what are the exact requirements that would be required in a dental clinic.

The first category of lab equipments includes the Amalgams and the Accessories. These deal with the filling materials and application tools that the dentist uses to dig and clean the holes made in the teeth in order to treat cavities.

The second category of equipments is the collection of lab instruments. The equipments included here deal mainly with diagnosing dental problems or creating dental products. Some of the equipments that can be listed here are the lab scrappers, lab, knives, lab scissors and many more.

The equipments required for performing administrative tasks are placed in the third category of equipments required for dental clinics. They include items that can be used for billing, record keeping or registration formalities. Items such as a registration form, files, insurance forms and many more are counted under this category.

The final, i.e. the fourth category consists of equipments that are used to perform the main dental work. Items here include air and water syringes, nitrous oxide, diamonds and curing lights and many more. These are the equipments that are required for major treatments conducted in the dental clinics.

There are a lot of tools that a dental clinic would need in order to ensure proper working. These tools and equipments need to be of good quality and should match the needs of the dentists. There are many suppliers who provide Dental Lab Equipments of good quality. As these equipments are used for a medical purpose to manage the oral health of people, it should be made sure that they are of the highest quality. In order to get a good deal on these items, one should know what are the products available in the market and at what cost. As mentioned above, it is important to check the quality and cost ratio. This will help select the best among all those that are available.

While visiting a dental laboratory, you would surely want to get professional and reliable services. In order to ensure this, it is important that the lab that you are going to visit is extremely careful about safety issues and uses advanced dental lab equipment, apart from following updated dental technology.

Every day, the dental professionals come in contact with a number of microorganisms, which can cause life threatening diseases like hepatitis B virus (HBV), tuberculosis, and even Acquired Immunodeficiency Syndrome (AIDS). As the new HTM regulations have suggested, dental professionals must offer quality health services to all the patients and to do this, complete decontamination of the different dental lab equipments is a must.

Apart from autoclaving or sterilizing the dental non-surgical as well as surgical devices, the employees at dental laboratory have to be extremely careful while coming in direct contact with dental devices and patients. Thus, the risk of your employees getting infected by microorganisms is eliminated apart from ensuring that your clinical environment is absolutely hygienic.

In order to ensure the safety of the professionals working in dental labs, there are different types of effective personal protective equipments available in the market, including eye protection devices, gloves, masks, protective clothing, and face shield etc. Wearing gloves are one of the best tricks to avoid direct contact with patient’s mucus membranes or mucus. It is advisable to remove the gloves after treating one patient and re-glove before treating the next patient.

Alternatively, one can also use disposable gloves. It is a must to wear medicated gloves while dealing with advanced technology like full contour Zirconia which is one of the most popular trends these days and offers effective solutions to the patients. One can also utilize utility gloves that are used for cleaning environmental surfaces. Dental lab equipment too can be re-used after decontamination. But if there is any sort of puncture or crack, it would be better to discard them.